| Port |
Shows the list of ports for which you can configure
dscp ingress and egress settings. |
| Ingress |
In Ingress settings you can change ingress
translation and classification settings for individual ports. There
are two configuration parameters available:
|
| Translate |
Click to enable the Ingress Translation. |
| Classify |
Classification for a port have four different values:
- Disable: No Ingress DSCP Classification.
- DSCP=0: Classify if incoming (or translated if enabled) DSCP is 0.
- Selected: Classify only selected DSCP for which classification is enabled as specified in DSCP Translation window for the specific DSCP.
- All: Classify all DSCP.
|
| Egress |
Port Egress Rewriting can be one of the following:
- Disable: No Egress rewrite.
- Enable: Rewrite enabled without remapping.
- Remap DP Unaware: DSCP from analyzer is remapped and frame is
remarked with remapped DSCP value. The remapped DSCP value is always
taken from the table.
- Remap DP Aware: DSCP from analyzer is remapped and frame is remarked
with remapped DSCP value. Depending on the DP level of the frame, the
remapped DSCP value is either taken from the table or from the table.
|
