DSCP Translation

This page allows you to configure the basic QoS DSCP Translation settings for all switches. DSCP translation can be done in Ingress or Egress.


Object	Description
DSCP	Maximum number of supported DSCP values are 64 and valid DSCP values are 0 – 63.
Ingress	Ingress side DSCP can be first translated to new DSCP before using the DSCP for QoS class and DPL map. There are two configuration parameters for DSCP Translation: Translate Classify
Translation	DSCP at Ingress side can be translated to any of (0 – 63) DSCP values.
Classify	Click to enable Classification at ingress side.
Egress	There are the following configurable parameters for Egress side: Remap DP0: Controls the remapping for frames with DP level 0. Remap DP1: Controls the remapping for frames with DP level 1.
Remap DP0	Select the DSCP value from select menu to which you want to remap. DSCP valid values are 0 – 63.
Remap DP1	Select the DSCP value from select menu to which you want to remap. DSCP valid values are 0 – 63.


Buttons
	Save changes.
	Undo any changes and revert to previously saved values.