Enable Graceful Restart on Tenant VRF

About this task

Enable graceful restart per tenant VRF when you create or update VRF. EFA provisions the user input graceful restart on the switches during the instantiation and update of VRF.

Based on the endpoints present in the EPG, VRF is instantiated on the switches when you trigger L3 endpoint group create or L2 endpoint group transition to L3 endpoint group.

VRF is updated on the switches when you trigger VRF update operation, based on the endpoints present in the endpoint groups using this VRF.

Currently, graceful restart is automatically configured when you configure the VRF.

Note

By default, graceful restart is disabled. Default value of graceful restart is the switch default.
Pre-EFA 2.4.0 versions have graceful restart enabled by default.
Upgrade from pre-2.4.0 to 2.4.x, and 2.5.0 retains the graceful restart enabled for all the pre-2.4.0 VRFs.

Procedure

To enable graceful restart when you create a tenant VRF, run the following command:

efa tenant vrf create --name <vrf-name> --tenant <tenant-name> 
            --graceful-restart=true/false

To enable graceful restart on an existing tenant VRF, run the following command:

efa tenant vrf update --name <vrf-name> --tenant <tenant-name> 
            --operation graceful-restart-update --graceful-restart=true/false

Example

efa tenant vrf create --name vrf1 --tenant tenant1
efa tenant vrf create –name vrf10 –tenant tenant1 –-graceful-restart=true

efa tenant epg create --name ten1epg1 --tenant tenant1 
           --port 10.24.80.134[0/11],10.24.80.135[0/11] 
           --switchport-mode trunk –ctag-range 11 --vrf vrf1 –anycast-ip 11:10.10.11.1/24
efa tenant epg create --name ten1epg2 --tenant tenant1 
           --port 10.24.80.134[0/12],10.24.80.135[0/12] 
           --switchport-mode trunk –ctag-range 12 --vrf vrf10 –anycast-ip 12:10.10.12.1/24
efa tenant vrf update –-name vrf1 –-tenant tenant1
           --operation graceful-restart-update –-graceful-restart=true
efa tenant vrf update --name vrf10 –-tenant tenant1
           --operation graceful-restart-update –graceful-restart=false