Start Live Capture
An ExtremeWireless access point (AP) can capture
wired and wireless traffic and forward it to a remote Wireshark application. This
feature, called Live Capture, must be enabled on the AP using ExtremeCloud.
-
Make sure that the Wireshark application is
running on a host that has access to the capturing AP's wired Ethernet
interface. Wireshark must be configured to capture packets from a remote
interface. Consult Wireshark documentation to configure the application to
listen on a Remote Interface.
-
From the left menu, select
.
-
Select the ExtremeWireless capturing AP from the
list of devices.
The individual AP page opens.
-
Select .
-
In the Timeout field, specify a
timeout duration, and then select Live Capture.
A message displays stating
that Live Capture has started.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB