SNMP

SNMP is configured at the site level and is applied to all entitled switches and ExtremeWirelessWiNG APs in the site. It is disabled by default, but you can enable SNMPv2 or SNMPv3. When SNMP is enabled on a switch, all of the MIBs supported by the switch model can be accessed in read-only mode.

Note

For a list of the available MIBs, see the EXOS User Guide.

The configurable options that display depend on which mode you select. The SNMPv2 options are trap destinations and community strings. The SNMPv3 options are notification destinations (which must include an SNMPv3 user) and SNMPv3 users.

When you configure SNMPv3 options for one site, those options are available when you configure other sites.

SNMP access is read-only.