show iproute mpls

show iproute mpls {lsp lsp_name | vlan vlan_name | permanent | ip_address netmask | summary} {unicast} {vr vrname}

Description

Displays the MPLS contents of the IP routing table.

Syntax Description


`lsp_name`	Specifies an LSP name.
`vlan_name`	Specifies a VLAN name.
permanent	Specifies permanent routing.
`ip_address`	Specifies an IP address.
`netmask`	Specifies a subnet mask.
unicast	Displays unicast routes.
`vrname`	Specifies a VR or VRF.

Default

N/A.

Usage Guidelines

A c flag in the Flags column indicates a compressed route resulting from enabling compression using the enable iproute compression command. The total number of compressed routes is also shown.

All routes that are provided to the FIB display the f flag.

If you do not specify a VR or VRF, the command applies to the current VR context.

Example

The following example example displays detailed information about all IP routing:

Switch.3 # show iproute mpls

History

This command was first available in ExtremeXOS 12.2.2.

Platform Availability

This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.