Displays the access-list permit and deny statistics.
|snmp||Specifies statistics for SNMP.|
|telnet||Specifies statistics for Telnet.|
|ssh2||Specifies statistics for SSH2.|
|http||Specifies statistics for HTTP.|
Use this command to display the access-list permit and deny statistics. The permit and deny counters are updated automatically regardless of whether the ACL is configured to add counters.
The following command displays permit and deny statistics for the SNMP application:
# sh access-list counter process snmp
Following is sample output for this command:
show access-list counter process snmp ============================================================= Access-list Permit Packets Deny Packets ============================================================= a1 10 0 a3 0 25 a2 0 6 ============================================================= Total Rules : 3
This command was first available in ExtremeXOS 12.5.
This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.