Removes the specified smart relay configuration that was specified at the VLAN level.
ipv4 | Specifies unconfiguring the DHCPv4 BOOTP Relay service (default). |
ipv6 | Specifies unconfiguring the DHCPv6 BOOTP Relay service. |
vlan | Unconfigures BOOTP relay for a specified VLAN. |
vlan_name | Specifies the VLAN name. |
include-secondary | Removes the include-secondary configuration for the specified VLAN. |
IPv4 is the default relay service.
Use this command to remove the specified smart relay configuration that was specified at the VLAN level.
The following command removes DHCPv4 BOOTP Relay service, and removes the include-secondary configuration for the VLAN "vlan 100":
unconfigure bootprelay ipv4 vlan vlan_100 include-secondary
This command was first available in ExtremeXOS 15.4.
This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.