show vm-tracking

Example

The following command displays the XNV configuration and the authenticated VMs:

* Switch.51 # sh vm-tracking

-----------------------------------------------------------
VM Tracking Global Configuration
-----------------------------------------------------------
VM Tracking                     : Enabled
VM Tracking authentication order: nms vm-map local
VM Tracking nms reauth period   : 0 (Re-authentication disabled)
VM Tracking blackhole policy    : none
-----------------------------------------------------------

Port                         : 1:20
VM TRACKING                  : ENABLED

                  Flags
MAC               APC    IP Address       Type      Value
--------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------

00:00:00:00:00:11 LBI    255.255.255.255	VM
                                            VPP	lvpp1
                                            IEP
                                            EEP
00:00:00:00:00:12 ---                        VM
                                            VPP
                                            IEP
                                            EEP
00:00:00:00:00:13 V---   30.30.30.30	    VM	VMware-VM#2
                                            VPP       nvpp1
                                            IEP       a1.pol
                                            EEP	   a2.pol
--------------------------------------------------------------------------------------------------------

Flags :
(A)uthenticated : L - Local, N - NMS, V - VMMAP
(P)olicy Applied : B - All Ingress and Egress, E - All Egress, I - All Ingress
(C)counter Installed: B - Both Ingress and Egress, E - Egress, I - Ingress

Type :
IEP - Ingress Error Policies
EEP - Egress Error Policies

Number of Network VMs Authenticated: 1
Number of Local VMs Authenticated  : 1
Number of VMs Authenticated        : 2