Configures the priority for the segment.
|segment-name||An alpha numeric string identifying the segment name.|
|dot1p_priority||Priority value that is set in the DMM/DMR. The range is 0 to 7.|
The default is 6.
Use this command to configure the dot1p priority that a DMM/DMR frame can get.
The following example configures a dot1p priority of 3 for segment s2.
configure cfm segment s2 dot1p 3
This command was first available in ExtremeXOS 12.3.
This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.