Enables RSVP-TE for the specified MPLS-configured VLAN.
|vlan||Specifies that RSVP-TE is to be enabled on one or more VLANs.|
|vlan_name||Identifies a specific VLAN on which RSVP-TE is to be enabled.|
|vlan all||Enables RSVP-TE on all VLANS that have been added to MPLS.|
When RSVP-TE is enabled, TE LSP establishment for configured LSPs begins and the processing of RSVP path/reserve messages from peer LSRs is permitted. By default, RSVP-TE is disabled for all MPLS-configured VLANs. Specifying the optional all keyword enables RSVP-TE for all VLANs that have been added to MPLS.
The following command enables RSVP-TE on the specified VLAN:
enable mpls rsvp-te vlan vlan_1
This command was first available in ExtremeXOS 11.6.
This command is available only on the platforms that support MPLS as described in the Switch Engine 32.3 Feature License Requirements document.