configure snmpv3 target-addr timeout

configure snmpv3 target-addr [[hex hex_addr_name] | addr_name] timeout timeout_val


Configures the SNMPv3 INFORM notification timeout.

Syntax Description

hex_addr_name Specifies the address name in hexadecimal format.
addr_name Specifies the address name in ASCII format.
timeout_val Specifies the number of seconds.


The timeout value default is 15 seconds.

Usage Guidelines

Use this command to configure how many seconds to wait for a response before resending an SNMPv3 INFORM.


The following command configures a timeout value of 20 seconds for the target address A1:

configure snmpv3 target-addr A1 timeout 20


This command was first available in ExtremeXOS 12.5.3.

Platform Availability

This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.