configure stpd trap new-root

configure stpd stpd_name trap new-root [on | off]


Enables and disables the new-root trap.

Syntax Description

stpd_name Specifies an STPD name on the switch.
on Enables the new-root trap.
off Disables the new-root trap.


By default, the trap is enabled (on).

Usage Guidelines

The new-root trap is sent when the new root bridge is elected.


The following example disables the new-root trap for the STP domain r1.

configure stpd r1 trap new-root off


This command was first available in ExtremeXOS 15.7.1.

Platform Availability

This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.