This command is used to show the mvrp settings as follows. If the MVRP enabled port is a load shared port, a suffix ‘g‘ is displayed.
|mvrp||Multiple VLAN Registration Protocol.|
Use this command to show the MVRP settings.
# show mvrp MVRP enabled : Enabled MVRP dynamic VLAN creation : Enabled
MVRP VLAN registration : ForbiddenMVRP default STP domain : s0 MVRP enabled ports : 9 *11 *13 Flags: (*) Active, (!) Administratively disabled. (g) Load Sharing Port (G) Multi-switch LAG Group port
This command was first available in ExtremeXOS 15.3.
MRVP VLAN registration output was added in 15.3.2.
Flag showing if the MVRP-enabled port is an This command is available on ExtremeSwitching 5320, 5420, 5520, 5720 series switches. port added in ExtremeXOS 22.1
This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.