Enables or disables MAC address tracking for all MAC addresses on the specified ports.
|add||Enables MAC address tracking for the specified ports.|
|delete||Disables MAC address tracking for the specified ports.|
|port_list||Specifies a list of ports on which MAC address tracking is to be enabled or disabled.|
|all||Specifies that MAC address tracking is to be enabled or disabled on all ports.|
No ports are enabled for MAC address tracking.
MAC address tracking events on enabled ports generate EMS messages and can optionally generate SNMP traps.
NoteWhen a MAC address is configured in the tracking table, but detected on a MAC tracking enabled port, the per MAC address statistical counters are not updated.
The following example enables MAC address tracking for all MAC addresses on port 2:1:
configure fdb mac-tracking add ports 2:1
This command was first available in ExtremeXOS 12.4.
This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.