configure vlan router-discovery other-config-flag

configure vlan vlan_name router-discovery {ipv6} other-config-flag on_off


Configures the other stateful configuration flag value sent in router discovery advertisements on the VLAN.

Syntax Description

vlan_name Specifies an IPv6 configured VLAN.
on_off Specifies setting the flag to on or off.



Usage Guidelines

This command configures the contents of the other stateful configuration flag in the router advertisement messages.

When set to on, hosts use the administered (stateful) protocol (DHCP) for autoconfiguration of other (non-address) information. If this command is not entered, the default value is off.


The following example configures the other stateful configuration flag to be on for the VLAN "top_floor":

configure vlan top_floor router-discovery other-config-flag on


This command was first available in ExtremeXOS 11.2.

Platform Availability

This command is available on the platforms listed for the IPv6 unicast routing feature in the Switch Engine 32.3 Feature License Requirements document.