Disables processing the strict source route IP option in the IPv4 packet header.
This command has no arguments or variables.
Enabled.
Disables the switch from forwarding IP packets that have the strict source routing IP option turned on. The switch drops packets that have the strict source routing IP option enabled.
The following example disables processing of the strict source route IP option:
# disable ip option strict-source-route
This command was first available in ExtremeXOS 10.1.
This command was removed in ExtremeXOS 30.1, and then re-introduced in ExtremeXOS 31.2.
This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.