Removes a dynamic ACL rule from the specified interface.
|ruleName||Specifies a dynamic ACL rule name.|
|any||Deletes this ACL as the wildcard ACL.|
|vlan_name||Specifies the VLAN on which this ACL is deleted.|
|port_list||Specifies the ports on which this ACL is deleted.|
|all||Deletes this ACL from all interfaces.|
|ingress||Deletes the ACL for packets entering the switch on this interface.|
|egress||Deletes the ACL for packets leaving the switch from this interface.|
The default direction is ingress.
Specifying the keyword all removes the ACL from all interfaces it is used on.
The following command removes the dynamic ACL icmp-echo from the port 1:2:
configure access-list delete icmp-echo ports 1:2
This command was first available in ExtremeXOS 11.3.
This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.