configure mpls rsvp-te lsp path use profile

configure mpls rsvp-te lsp lsp_name path [path_name | any] use profile profile_name

Description

Changes the profile that the configured LSP path uses.


`lsp_name`	Specifies the RSVP-TE LSP.
`path_name`	Specifies the configured RSVP-TE LSP path.
`profile_name`	Specifies a profile to be applied to the configured LSP path.

N/A.

This command changes the profile that the configured LSP path uses.

Note

Changing the profile while an LSP is active may cause the LSP to be torn down and re-signaled.

The following command configures the switch to apply the LSP profile gold-class to the LSP path sydney-bypass for the LSP aus:

configure mpls rsvp-te lsp aus path sydney-bypass use profile gold-class

This command was first available in ExtremeXOS 11.6.

This command is available only on the platforms that support MPLS as described in the Switch Engine 32.3 Feature License Requirements document.