This command displays counters for an area or a VLAN.
|area_name||Specifies a router process for which to display the IS-IS counters. If you do not specify an IS-IS area, the software displays counters for all areas.|
|vlan_name||Specifies a VLAN for which to display IS-IS counters.|
|all||Displays IS-IS counters for all areas or VLANs.|
If you enter the show isis counters command without any additional keywords or parameters, the software displays the counters for all areas.
The following command displays the IS-IS counters for the configured area:
show isis counters
The following command displays the IS-IS counters for the SJvlan VLAN:
show isis counters vlan SJvlan
This command was first available in ExtremeXOS 12.1.
This command is available on platforms with a Premier license as described in the Switch Engine 32.3 Feature License Requirements document.