Controls the accessible string size for the SNMP ifAlias object.
| default | Specifies read-only access to the system. |
| extended | Specifies read and write access to the system. |
N/A.
Use this command to control the accessible string size for the SNMP ifAlias object.
If you choose the extended size option, the following warning will be displayed:
Warning: Changing the size to [extended] requires the use of increased 255 chars long ifAlias object of ifXtable from IF-MIB(RFC 2233)You can always configure a 255 character long string regardless the configured value of ifAlias size. Its value only affects the SNMP behavior.
The following example shows how to configure the accessible string size for the SNMP ifAlias to the default value:
config snmp ifmib ifalias size[default
This command was first available in ExtremeXOS 15.3.
This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.