Displays the configured number of IPv4 and IPv6 routes reserved in the Longest Prefix Match (LPM) hardware table.
| slot_num | For SummitStack only, this option displays the reservations for the specified slot. |
N/A.
The IPv4 Routes column in the command output shows whether IPv4 routes are stored in internal or external LPM tables.
To modify the configuration that this command displays, use the following command:
configure iproute reserved-entries [ num_routes_needed | maximum | default ] slot [all |slot_num]The following example displays the reserved space for IP routes:
# show iproute reserved-entries
IPv4 # Reserved Routes Minimum #
Slot Type Routes IPv4 (or IPv6) IPv4 Hosts
---- ------------------------------- -------- ------- ------------------ ----------
1 5720-24MXW Internal 20432 ( 10216) [default] 4112
Maximum supported # IPv4 (or IPv6) Reserved Routes:
5320 16-port, 5320 24-port Internal 8160 ( 4080)
5320 48-port, 5420F, 5420M Internal 12256 ( 6128)
5520 Internal 16352 ( 8176)
5720MW Internal 16352 ( 8176)
5720MXW Internal 24544 ( 12272)
Note: IPv4 Hosts can occupy unused HW Route table space,
unless # Reserved Routes is "maximum".
This command was first available in ExtremeXOS 12.1.
This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.