Displays all counters for Spanning Tree.
stpd_name | Specifies an STPD name on the switch. |
port_list | Specifies one or more ports or slots and ports. |
counters | Displays counters for the specified port. |
N/A
None.
The following example displays the counters for port 10:10 in STP domain r1:
show stpd r1 ports 10:10 counters Port 10:10 ---------- Disputed BPDU : 0 Invalid BPDU : 0 Message Expiration : 0 STP BPDU Rx : 0 STP BPDU Tx : 0 STP TCN BPDU Rx : 0 STP TCN BPDU Tx : 0 STP TC BPDU Rx : 0 STP TC BPDU Tx : 0 RST BPDU Rx : 0 RST BPDU Tx : 0 RST TC BPDU Rx : 0 RST TC BPDU Tx : 0 MST BPDU Rx : 1287 MST BPDU Tx : 4 MST CIST TC BPDU Rx : 2 MST CIST TC BPDU Tx : 2 Forward Transitions Count : 1
This command was first available in ExtremeXOS 15.7.1.
This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.