Configures the duration for which the switch temporarily enables multicast flooding when an EAPS topology change occurs.
|seconds||Specifies the period (in seconds) for which the switch enables multicast flooding.|
The flooding duration configuration applies only when the temporary-flooding feature is enabled with the following command:configure eaps multicast temporary-flooding
The following command configures the temporary-flooding feature duration for 30 seconds:
configure eaps multicast temporary-flooding duration 30
This command was first available in ExtremeXOS 12.1.2.
This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.