This command displays all learned Convergence End Points (CEPs) information.
|port_list||List of ports to show CEPs on.|
|all||Specifies that information for CEPs on all ports should appear.|
The following example shows CEPs for port 12:
# show policy convergence-endpoint connections ports 12
Convergence End Point Connection Info for port 12 Endpoint Type cisco Policy Index 3 Discovery Time Mon FEB 06 02:31:42 2008 Firmware Version Address Type unknown Endpoint IP unavailable Endpoint MAC 00:04:0d:01:f8:35
This command was first available in ExtremeXOS 22.2.
This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.