This command has been replaced with the following command: disable l2vpn [vpls [vpls_name | all] | vpws [vpws_name | all]] health-check vccv .
This command is still supported for backward compatibility, but it will be removed from a future release, so we recommend that you start using the new command.
Disables the VCCV health check feature on one or all VPLS instances on the local node.
|vpls_name||Identifies the VPLS for which health check is to be disabled.|
|all||Specifies that health check is to be disabled on all VPLS instances on the local node.|
Health check is disabled.
The following command disables the health check feature on the VPLS instance myvpls:
disable vpls myvpls health-check vccv
This command was first available in ExtremeXOS 12.1.
This command is available only on the platforms that support MPLS as described in the Switch Engine 32.3 Feature License Requirements document.