configure auto-peering one-config password

configure auto-peering one-config password [none | {encrypted} tcpPassword]


Configures the auto-peering TCP MD5 password devices will configure in the TCP MD5.

Syntax Description

auto-peering Specifies Auto-peering.
one-config Specifies changing the BGP Auto-peering OneConfig configuration.
password Configures the password for Auto peering neighbors.
none Removes the current password
encrypted Specifies that the password is in encrypted format.
tcpPassword Specifes the TCP MD5 password/secret-key.



Usage Guidelines

Changing auto peering password might cause peers to be disconnected if passwords do not match.


The following example sets the password to "123":

 # configure auto-peering one-config password 123


This command was first available in ExtremeXOS 31.1.

Platform Availability

This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.