Displays the MSRP configured port information.
| msrp | Multiple Stream Registration Protocol. |
| ports | Ports. |
| port_list | Port list separated by a comma or "-". |
| detail | Port information with more detail. |
N/A.
Displays the MSRP configured port information. Specifying detail displays port information with more detail.
# show msrp ports
Port Enabled Oper Port Dplx Jumbo Jumbo Cls Bndry State Sr-Pvid
Speed Size App/Reg
---- ------- ------ ------ ---- ----- ----- --- ----- ------- -------
5 Y Up/dbg N 9216 A N QA/IN 2
B N QA/IN 2
*21 Y Up 1000 M Full N 9216 A N QA/IN 2
B N QA/IN 2
--------------------------------------------------------------------------------
Flags : (*) Active, (!) Administratively disabled
App : Applicant State, Bndry : Boundary,
Cls : Traffic Class, Dplx : Duplex,
Oper : MSRP Operational State, Prop : Propagated,
Reg : Registrar State
MSRP Declaration Types:
Adv : Talker Advertise, AskFail : Listener Asking Failed,
Fail : Talker Fail, RdyFail : Listener Ready Failed,
Ready : Listener Ready
Applicant States:
AA : Anxious active, AN : Anxious new,
AO : Anxious observer, AP : Anxious passive,
LA : Leaving active, LO : Leaving observer,
QA : Quiet active, QO : Quiet observer,
QP : Quiet passive, VN : Very anxious new,
VO : Very anxious observer, VP : Very anxious passive
Registrar States:
IN : In - Registered, LV : Leaving - Timing out,
MT : Empty - Not Registered
#show msrp ports
21 detail Port Enabled
Oper Port Dplx Jumbo Jumbo Cls Bndry
State Sr-Pvid Speed Size App/Reg ---- -------
------ ------ ---- ----- ----- --- -----
------- ------- *21 Y
Up 1000 M Full N 9216
A N QA/IN
2
B N QA/IN
2
Talkers: Stream Id Declaration
State Rx
Prop App Reg ----------------------- ------- ------- --- --- 00:50:c2:4e:d3:2d:00:00 Adv Adv VO
IN 00:50:c2:4e:d3:2d:00:01 Adv Adv VO
IN
Listeners: Stream Id Declaration
State Rx
Prop App Reg ----------------------- ------- ------- --- --- 00:50:c2:4e:d3:3d:00:00 Ready Ready VO
IN 00:50:c2:4e:d3:3d:00:01 Ready Ready VO
IN -------------------------------------------------------------------------------- Flags : (*) Active, (!) Administratively disabled App : Applicant State, Bndry
: Boundary Cls : Traffic Class, Dplx :
Duplex Oper : MSRP Operational State, Prop : Propagated Reg : Registrar State MSRP Declaration
Types: Adv :
Talker Advertise, AskFail : Listener Asking Failed, Fail : Talker
Fail, RdyFail : Listener Ready Failed, Ready : Listener Ready Applicant
States: AA :
Anxious active, AN : Anxious new, AO :
Anxious observer, AP : Anxious passive, LA :
Leaving active, LO : Leaving observer, QA :
Quiet active, QO : Quiet observer, QP :
Quiet passive, VN : Very anxious new, VO : Very
anxious observer, VP : Very anxious passive Registrar
States: IN : In -
Registered, LV : Leaving - Timing out MT :
Empty - Not Registered
This command was first available in ExtremeXOS 15.3.
This command is available on all platforms that support the AVB feature and that have an AVB feature pack license installed. To see which platforms support AVB and for information about obtaining a license, see the Switch Engine 32.3 Feature License Requirements .