Enables or disables authentication username configuration to use the Principal Name in the certificate as the username.
|x509v3||Specifies x509v3 public-key authentication.|
|username||Specifies X509v3 authentication username configuration.|
|overwrite||Specifies that when radius-password-auth is turned on, to use the Principal Name in the certificate as the username.|
|on||Specifies to enable X509v3 authentication username configuration.|
|off||Specifies to disable X509v3 authentication username configuration. (Default).|
The following example enable using the Principal Name in the certificate as the username.
# configure ssh2 x509v3 username overwrite on Note: This command is applicable only if X509v3 'radius-password-auth' command is turned on.
This command was first available in ExtremeXOS 32.2.
This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.