disable rip aggregation

disable rip aggregation


Disables the RIP aggregation of subnet information on a RIP version 2 (RIPv2) router.

Syntax Description

This command has no arguments or variables.


RIP aggregation is disabled by default.

Usage Guidelines

The disable RIP aggregation command disables the RIP aggregation of subnet information on a switch configured to send RIPv2-compatible traffic. The switch summarizes subnet routes to the nearest class network route. The following rules apply when using RIP aggregation:
  • Within a class boundary, no routes are aggregated.
  • If aggregation is disabled, subnet routes are never aggregated, even when crossing a class boundary.


The following command disables RIP aggregation on the interface:

# disable rip aggregation


This command was first available in ExtremeXOS 10.1.

Platform Availability

This command is available on all platforms with a Base license or higher as described in the Switch Engine 32.3 Feature License Requirements document.