Configures This command is available on ExtremeSwitching 5320, 5420, 5520, 5720 series switches. LACP MAC on each of the MLAG peer switches. This MAC address will be used as the system identifier in the LACPDUs sent over the MLAG ports.
|mlag||Multi-switch link aggregation used to combine remote ports and local ports to a common logical connection.|
|peer_name||Alphanumeric string identifying the MLAG peer.|
|lacp-mac||MAC address to be used as the system identifier in LACPDU for MLAG ports.|
|auto||System identifier in LACPDU automatically uses switch MAC of MLAG peer with higher IP address for ISC control VLAN (default).|
This command is used to configure the System Identifier used in LACPDU for MLAG ports. The same value has to be configured on both the MLAG peers.
# configure mlag peer "peer1" lacp-mac auto # configure mlag peer "peer1" lacp-mac 00:01:02:03:04:05
This command was first available in ExtremeXOS 15.3.
This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.