configure snmpv3 target-addr retry

configure snmpv3 target-addr [[hex hex_addr_name] | addr_name] retry retry_count


Configures SNMPv3 INFORM notification retries.

Syntax Description

hex_addr_name Specifies a address name in hexadecimal format.
addr_name Specifies the address name in ASCII format.
retry_count Specifies the maximum number of times to resend an SNMPv3 inform.


The retry default is 3.

Usage Guidelines

Use this command to configure the number of times an SNMPv3 INFORM message is to be resent to the (notification responder) manager when a response has not been received.


The following command configures a retry count of 5 for the target address A1:

configure snmpv3 target-addr A1 retry 5


This command was first available in ExtremeXOS 12.5.3.

Platform Availability

This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.