configure cfm domain association end-point delete group

configure cfm domain domain_name association association_name ports port_list end-point [up|down] delete group [group_name | all ]

Description

This command allows you to delete one or all groups.


`domain_name`	Enter the domain associated with the MA you are configuring.
`association_name`	IEEE 802.1ag or ITU-T Y.1731 association name.
`port_list`	Enter the port number you want to configure as either an UP or DOWN MEP.
delete	Delete configuration from the association

N/A.

Use this command to delete one or all groups from the association.

configure cfm domain "MD1" association "MD1v1" ports 17 end-point down delete group "eapsCfmGrp"

This command was first available in ExtremeXOS 15.2.

This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.