Enables a VRF.
NoteThis command does not affect virtual routers.
|vrf-name||Specifies the name of the VR or VRF instance.|
This command is used to administratively enable or disable a VRF. The VRF specific commands are still accepted and retained by the switch. This configuration has an operational impact on the VRF.
The following example enables VRF "vrf1":
enable virtual-router vrf1
This command was first available in ExtremeXOS 12.5.
This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.