Allows you to disassociate a bridge port extender (BPE) from a slot number assignment.
|vpex||Specifies Virtual Port Extender (VPEX).|
|ports||Specifies switch ports attached to BPEs.|
|port_list||Specifies switch ports attached to BPEs.
Must be in the format slot:port.
Note: If the switch port is a LAG, the port specified must be the master port.
|slot||Specifies the BPE slot assignment.|
The behavior of this command is similar to removing slots within a chassis. After executing this command, the BPE no longer occupies the slot number assignment.
The following example removes the slot number assignment from a BPE attached to switch port 1:23:
# unconfigure vpex ports 1:23 slot
This command was first available in ExtremeXOS 22.5.
This command is available on ExtremeSwitching 5420 and 5520 series switches.