Displays information about the OSPF area.
|detail||Specifies to display the information in detailed format.|
|area-identifier||Specifies an OSPF area.|
The following is sample output from this command:
# show ospf area AREA ID Type Summ Def Num Num SPF Num LSA Metric ABR ASBR Runs LSAs Checksum 0.0.0.0 NORM ---- ------ 0 0 0 0 0x0
This command was first available in ExtremeXOS 10.1.
This command is available on platforms with Base license, or higher, as described in the Switch Engine 32.3 Feature License Requirements document.