Configures the LLDP port to advertise or not advertise up to 4 file server IP addresses to its neighbors. The Avaya phone uses this proprietary LLDP TLV to learn the IP address(es) of the file server(s) to use.
|all||Specifies all ports on the switch.|
|port_list||Specifies one or more ports or slots and ports.|
|advertise||Specifies to send the information to neighbors.|
|no-advertise||Specifies not to send the information to neighbors.|
|ip_address_1...4||Specifies IP address of up to
4 file servers.
NOTE: This parameter does not apply when you configure the no-advertise parameter.
The Avaya phone uses this proprietary LLDP TLV for addressing information. You can configure the IP address for up to 4 file servers in a single TLV.
The following command configures all ports to advertise two file server IP addresses to neighbors:
configure lldp ports 1-5 advertise vendor-specific avaya-extreme call-server 10.20.10.10 10.12.10.10
This command was first available in ExtremeXOS 11.5.
This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.