Configures the optional user-defined virtual router (VR) and address for the server for ExtremeCloud™ IQ Agent to connect to.
| iqagent | Specifies configuring IQ Agent. |
| server | Specifies configuring IQ server. |
| vr | Specifies selecting a VR for IQ server. |
| vr-name | Specifies the name of the VR. |
| none | Specifies no user-defined VR. Auto-discovery is used instead (default). |
| vlan | Specifies which VLAN to run on. |
| vlan-name | Specifies the name of the VLAN. |
| none | Specifies no user-defined VLAN. |
| ipaddress | Specifies configuring a server address |
| fqdn | Specifies a fully-qualified domain name for IQ server. |
| ip_address | Specifies an IP address for IQ server. |
| none | Specifies using auto-discovered information from IQ Agent discovery (default). |
By default, if no VR is specified, the VR is auto-discovered.
By default, for the server address, auto-discovery is used.
To view IQ Agent information, use the command show iqagent discovery.
The following example configures connecting to IQ server on VR "VR-Mgmt":
# configure iqagent server vr VR-Mgmt
The following example configures connecting to IQ server at the address 134.141.1.1:
# configure iqagent server ipaddress 134.141.1.1
The following example unconfigures any user-defined changes and returns to auto-discovery:
# configure iqagent server none
This command was first available in ExtremeXOS 30.7.
The vlan option was added in ExtremeXOS 32.1.
This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.