Configures the candidate rendezvous point advertising interval in PIM sparse mode operation.
| ipv4 | Specifies an IPv4 address. |
| ipv6 | Specifies an IPv6 address. |
| crp_adv_interval | Specifies a candidate rendezvous point advertising interval in seconds. The range is 1 to 1,717,986,918. |
The default is 60 seconds.
Increasing this time results in increased convergence time for CRP information to the PIM routers.
The following example configures the candidate rendezvous point advertising interval to 120 seconds:
configure pim crp timer 120
This command was first available in ExtremeXOS 10.1.
This command is available on platforms that support the appropriate license. For complete information about software licensing, including how to obtain and upgrade your license and which licenses support the PIM feature, see the Switch Engine 32.3 Feature License Requirements document.