configure cdp hold-time

configure cdp hold-time seconds


Configures the hold time of the neighbor information .

Syntax Description

seconds Duration in seconds that receiver must keep this packet. The range is 10-255 and the default is 180 seconds.


60 seconds.

Usage Guidelines

Use this command to configure the hold time of the neighbor information for which a receiving device should hold information before discarding it.


The following command configures the CDP hold time as two minutes:

configure cdp hold-time 120


This command was first available in ExtremeXOS 15.4.

Platform Availability

This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.