Displays the EAPS configuration (control, partner, or not added to an EAPS domain) of a specific VLAN.
|vlan_name||Specifies a VLAN name.|
Use this command to see if the specified VLAN is associated with an EAPS domain.
The output of this command displays whether the VLAN is a control or partner VLAN for an EAPS domain. This command also displays if the VLAN is not a member of any EAPS domain.
If a VLAN is a partner VLAN for more than one EAPS domain, all of the EAPS domains that the VLAN is a partner of appears in the output.
The following sample output displays the EAPS configuration for the control VLAN orange in EAPS domain eaps1:
#show vlan orange eaps Vlan is Control in following EAPS domain: eaps1
The following sample output displays the EAPS configuration for the protected VLAN purple in EAPS domain eaps1:
#show vlan purple eaps Vlan is Protected in following EAPS domain(s):eaps1
The following sample output displays information about the VLAN default not participating in EAPS:
#show vlan default eaps Vlan has not been added to any EAPS domain
This command was first available in ExtremeXOS 11.0.
This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.