Print
this page
Email this topic
Feedback
View PDF
Download EPUBclear network-clock ptp counters
clear network-clock ptp [boundary | ordinary] vlan [vlan_name {ipv4_address [unicast-master | unicast-slave]} | all] counters
Description
This command clears the accumulated PTP packet counters. The clear can be performed on the following groups:
Per unicast-master or unicast-slave peer on a clock port.
Peers on a clock port.
Peers on all clock ports.
Note
This command is available only for Boundary and Ordinary clocks.
Syntax Description
| network-clock | External Clock for Ethernet synchronization. |
| ptp | Precise Time Protoco.l |
| boundary | Boundary clock. |
| ordinary | Ordinary clock. |
| vlan | VLAN. |
| ipv4_address | Peer IP address. |
| unicast-master | IP addresses that are masters to the local clock. |
| unicast-slave | IP addresses that are slaves to the local clock. |
| all | All VLAN. |
| counters | PTP message counts. |
Default
N/A.
Usage Guidelines
Use this command to clear the accumulated PTP packet counters.
Example
N/A.
History
This command was first available in ExtremeXOS 15.2.
Platform Availability
This command is only available on boundary and ordinary clocks on Summit X460-G2, X670-G2 and X770.
Note
PTP commands can be used only with the Network Timing feature pack.