Print
this page
Email this topic
Feedback
View PDF
Download EPUBshow log configuration target xml-notification
show log configuration target xml-notification {xml_target_name}
Description
Displays XML target information.
Syntax Description
| xml_target_name | Specifies the configured xml notification target. |
Default
N/A.
Usage Guidelines
Use this command to display XML target information.
Example
The following command displays XML target information for all targets:
show log configuration target xml-notification
Following is sample output from the command:
Log Target : xml-notification (sqa) Enabled : yes Filter Name : DefaultFilter Match regex : Any Severity : Info (through Critical) Log Target : xml-notification (epi) Enabled : yes Filter Name : xmlc_filter_epi Match regex : Any Severity : Info (through Critical)
In the case that the alert is not
configured:
X670V-48t.1 # sh log configuration
Debug-Mode: Disabled
Log Target : memory-buffer
Enabled : yes
Filter Name : DefaultFilter
Match regex : Any
Severity : Debug-Data (through Critical)
Format : MM/DD/YYYY HH:MM:SS.hh <Severity:Component.SubComponent.Condition>
Buffer size : 1000 messages
Percent Full : 60%
Full Alert : None
Log Target : nvram
Enabled : yes
Filter Name : DefaultFilter
Match regex : Any
Severity : Warning (through Critical)
Format : MM/DD/YYYY HH:MM:SS.hh <Severity:Component.SubComponent.Condition>
Log Target : console
Enabled : no
Filter Name : DefaultFilter
Match regex : Any
Severity : Info (through Critical)
Format : MM/DD/YYYY HH:MM:SS.hh <Severity:Component.SubComponent.Condition>
In the case that the alert is configured and the percentage
threshold is set to
90:
X670V-48t.1 # sh log configuration
Debug-Mode: Disabled
Log Target : memory-buffer
Enabled : yes
Filter Name : DefaultFilter
Match regex : Any
Severity : Debug-Data (through Critical)
Format : MM/DD/YYYY HH:MM:SS.hh <Severity:Component.SubComponent.Condition>
Buffer size : 1000 messages
Percent Full : 60%
Full Alert : 90%
Log Target : nvram
Enabled : yes
Filter Name : DefaultFilter
Match regex : Any
Severity : Warning (through Critical)
Format : MM/DD/YYYY HH:MM:SS.hh <Severity:Component.SubComponent.Condition>
Log Target : console
Enabled : no
Filter Name : DefaultFilter
Match regex : Any
Severity : Info (through Critical)
Format : MM/DD/YYYY HH:MM:SS.hh <Severity:Component.SubComponent.Condition>
In the case that the buffer is currently wrapping and the percentage threshold is set
to
90:
X670V-48t.1 # sh log configuration
Debug-Mode: Disabled
Log Target : memory-buffer
Enabled : yes
Filter Name : DefaultFilter
Match regex : Any
Severity : Debug-Data (through Critical)
Format : MM/DD/YYYY HH:MM:SS.hh <Severity:Component.SubComponent.Condition>
Buffer size : 1000 messages
Percent Full : 100% (wrapping)
Full Alert : 90%
Log Target : nvram
Enabled : yes
Filter Name : DefaultFilter
Match regex : Any
Severity : Warning (through Critical)
Format : MM/DD/YYYY HH:MM:SS.hh <Severity:Component.SubComponent.Condition>
Log Target : console
Enabled : no
Filter Name : DefaultFilter
Match regex : Any
Severity : Info (through Critical)
Format : MM/DD/YYYY HH:MM:SS.hh <Severity:Component.SubComponent.Condition>
History
This command was first available in ExtremeXOS 12.4.
Platform Availability
This command is available on Summit X440-G2, X450-G2, X460-G2, X620, X670-G2, X770 series switches.