configure lldp ports management-address
Description
Configures the LLDP port to advertise or not to advertise management address information to its neighbors.
Syntax Description
all | Specifies all ports on the switch. |
port_list | Specifies one or more ports or slots and ports. |
advertise | Specifies to send the information to neighbors. |
no-advertise | Specifies not to send the information to neighbors. |
Default
No advertise.
Usage Guidelines
With ExtremeXOS, you can only add one management address TLV per LLDPDU and the information must be the IP address configured on the management VLAN. If no IP address is assigned to the management VLAN, the system sends the system MAC address. LLDP does not send out IPv6 addresses in this field.
Example
The following command advertises the management address information for port 1:5:
configure lldp ports 1:5 advertise management-address
History
This command was first available in ExtremeXOS 11.2.
Platform Availability
This command is available on all platforms.