configure policy resource-profile
configure policy resource-profile [default |less-acl [more-ipv4 | more-ipv4-no-ipv6] | [more-ipv4-no-ipv6 |more-mac-no-ipv6]]
Description
Configures a profile that controls the policy rule resources available for MAC/IPv4/IPv6/L2.
Syntax Description
default | Configure a profile with the default settings. |
less-acl | Configure a profile that removes some access list resources to be used for rules. |
more-ipv4 | Configure a profile that adds IPv4 rules. |
more-ipv4-no-ipv6 | Configure a profile that adds IPv4 rules at the expense of IPv6 rules. |
more-mac-no-ipv6 | Configure a profile that adds MAC rules at the expense of IPv6 rules. |
Default
None.
Usage Guidelines
You cannot configure the system to use a new resource profiles while policy is enabled. You must disable policy first.
You cannot configure the system to use a new resource-profile where the profile does not
fit with existing defined rules. An error message similar to the following
appears:
Current IPv6 rule usage 1 is higher than max value 0 supplied by profile more-mac-no-ipv6
Example
The following example configures the system to use the resource settings
of
more-ipv4-no-ipv6:
configure policy resource-profile more-ipv4-no-ipv6
History
This command was first available in ExtremeXOS 22.1.
Platform Availability
This command is available on Summit X440-G2, X450-G2, X460-G2, X620, X670-G2, and X770 series switches.