enable icmp redirects ipv6 fast-path
enable icmp redirects ipv6
fast-path
Description
When enabled, IPv6 packets forwarded by hardware (fast path) may trigger ICMP redirects.
Syntax Description
fast-path | IPv6 packets forwarded by hardware may trigger ICMP redirects |
Default
Disabled.
Usage Guidelines
Use this command to trigger ICMP redirects when IPv6 packets are forwarded by hardware (fast-path).
Example
The enabled or disabled setting is displayed when using the command:
# show ipconfig ipv6 Route Sharing : Disabled ICMP Redirect for Fast Path : Enabled Max Shared Gateways : Current: 4 Configured: 4 Interface IPv6 Prefix Flags v1 2001::1/24 -EUf---R- v1 fe80::204:96ff:fe1e:ec00%v1/64 -EUfP--R- Flags : D - Duplicate address detected on VLAN, T - Tentative address E - Interface enabled, U - Interface up, f - IPv6 forwarding enabled, i - Accept received router advertisements enabled, R - Send redirects enabled, r - Accept redirects enabled P - Prefix address
History
This command was first available in ExtremeXOS 15.2.
Platform Availability
This command is available on all platforms.