configure stpd ports loop-protect
configure stpd stpd_name
ports
loop-protect [on | off] port_list
Description
Enables and disables loop protect on a port.
Syntax Description
stpd_name | Specifies an STPD name on the switch. |
on | Enables loop protect on the specified port. |
off | Disables loop protect on the specified port. |
port_list | Specifies one or more ports or slots and ports. |
Default
By default, loop protect is off.
Usage Guidelines
Loop protect prevents loops due to misconfiguration or one-way communication failures.
Example
The following example enables loop protect on port 1:10 in the STP domain r1:
configure stpd r1 ports loop-protect on 1:10
History
This command was first available in ExtremeXOS 15.7.1.
Platform Availability
This command is available on all platforms.