configure ospf priority
Description
Configures the priority used in the designated router and backup designated router election algorithm for one or all OSPF interface(s) or for all the interfaces within the area.
Syntax Description
area-identifier | Specifies an OSPF area. |
vlan-name | Specifies a VLAN name. |
all | Specifies all VLANs. |
priority | Specifies a priority range. The range is 0 through 255. |
Default
The default setting is 1.
Usage Guidelines
The range is 0 through 255, and the default setting is 1. Setting the value to 0 ensures that the router is never selected as the designated router or backup designated router.
Example
The following command sets all the interfaces in area 1.2.3.4 to not be selected as the designated router:
configure ospf area 1.2.3.4 priority 0
History
This command was first available in ExtremeXOS 10.1.
Platform Availability
This command is available on platforms with an Advanced Edge or Core license as described in the Feature License Requirements document.