configure esrp add elrp-poll ports
Description
Configures the ports of an ESRP domain where ELRP packet transmission is requested by ESRP.
Syntax Description
esrpDomain | Specifies an ESRP domain name. |
ports | Specifies list of slots and ports. |
all | Specifies all ports in the ESRP domain. |
Default
All ports of an ESRP domain have ELRP transmission enabled.
Usage Guidelines
This command allows you to configure the ports in your network that might experience loops, such as ports that connect to master, slave, or ESRP-aware switches, to receive ELRP packets. You do not need to send ELRP packets to host ports.
![Note](../../images/Note_Note.png)
Note
The ExtremeXOS software does not support ELRP and Network Login on the same port.
Example
The following command enables ELRP packet transmission for slot 2, ports 3-5 on ESRP domain esrp1:
configure esrp esrp1 add elrp-poll ports 2:3-2:5
History
This command was first available in ExtremeXOS 11.1.
Platform Availability
This command is available on all platforms.