show snmp traps configuration
show snmp traps configuration
Description
Shows the current state of whether SNMP traps are set to occur when switch configurations are changed/saved.
Default
N/A
Example
The following example shows whether SNMP traps are set to occur when switch configurations are changed/saved:
# show snmp traps configuration SNMP Traps for configuration change : Disabled SNMP Traps for configuration save : Enabled
History
This command was first available in ExtremeXOS 22.1.
Platform Availability
Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X620, X440-G2 series switches.